Replacing Light Bulbs - Zephyr Twister AK8000BS Guide D'utilisation, D'entretien Et D'installation

REPLACING LIGHT BULBS

CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and
falls out.
If bulbs are difficult to turn due to prolonged use, firmly attach a glass suction cup approximately the
diameter of the bulb or use a rubber/latex glove and turn counter clockwise.
Replacement bulbs are available at specialty lighting stores.
AK8000BS & AK8100AS-BF: Purchase type MR16 (GU-10) 35W halogen.
AK8000AS-ES:
For Zephyr part numbers please turn to page 17 of the manual.
AK8000BS & AK8100AS
1
2
3
FIG 5
1
3
2
FIG 6
Purchase type: 13w Fluorescent, GU-24 CFL, STS T3 13GUS
14
www.zephyronline.com
AK8000AS-ES