SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
Aluminum Mesh Filters
not be replaced on a regular basis but are required to be kept clean.
discoloration is not covered by the warranty. Spray degreasing detergent and leave to soak if heavily soiled.
Fig 5
REPLACING LIGHT BULBS
CAUTION: Light bulb becomes extremely hot when turned on.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and falls out.
rubber/latex glove and turn counter clockwise.
For Zephyr part numbers please turn to page 18 of the manual.
Fig 6
15