Technical Data; Assembly - Bosch SmartphoneGrip BSP3200 Notice D'utilisation D'origine

(5) SmartphoneGrip mount
(6) Snap-in hook
(7) Socket contacts
(8) SmartphoneGrip contacts
(9) Status LED
(10) Inductive charging coil
SmartphoneGrip
Product code
Charging capacity via USB port
Inductive charging capacity
Operating temperature
Storage temperature
Protection rating
Weight, approx.
SmartphoneGrip Assembly
1
(5)
(6)
1
(5)
Bosch eBike Systems

Technical Data

Assembly

2 (4)
2
(11) Display mount fastening screw
(12) Removal blocker
(13) Keypad lock
a)
(14) Hex key
a)
(15) Smartphone
(16) Adapter tray
a) Not included in the scope of delivery
W
W
°F
°F
lb
Press and hold the release mechanism (4) to posi-
tion the SmartphoneGrip. Place the upper edge of
the SmartphoneGrip next to the snap-in hook (6) of
the display holder (5) ➊. Pull the SmartphoneGrip to-
wards you and push the SmartphoneGrip onto the
display holder ➋. Let go of the release mecha-
nism (4).
Press the release mechanism (4) while pulling it to-
wards you ➊ to remove the SmartphoneGrip. Lift off
the SmartphoneGrip and release the release mecha-
nism (4) ➋.
English – 7
BSP3200
5 W (1 A at 5 V)
7.5 W (1.5 A at 5 V)
Efficiency > 67 %
23 to 104
50 to 104
IP54
0.2
0 275 U08 3SG | (28.02.2022)