Operation; Status Indicators - Bosch SmartphoneGrip BSP3200 Notice D'utilisation D'origine

Masquer les pouces Voir aussi pour SmartphoneGrip BSP3200:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English – 10
Start-up
Put the smartphone in the SmartphoneGrip.
Load the eBike Flow app to show your ride data.
Depending on the operating system of the
smartphone, the eBike Flow app can be
downloaded free of charge from the Apple
App Store or Google Play Store.
Scan the code with your smartphone to download the
eBike Flow app.
Charging the Smartphone
While the smartphone is in the SmartphoneGrip, it
can be charged at the same time as displaying riding
data. If your smartphone has an inductive charging
function, you can charge the smartphone without
needing a cable.
Inductive Charging
The charging process starts automatically when you
place a smartphone with an inductive charging func-
tion in the SmartphoneGrip. The status LED (9) lights
up yellow. When the smartphone is fully charged, the
status LED (9) will light up green permanently.
The charging voltage is switched off when you remove
the smartphone from the holder.
Charging via USB
If your smartphone does not have an inductive charg-
ing function, you can charge your smartphone via the
USB port (3). To do so, open the USB cap and con-
nect a separate USB cable (not included in the scope
of delivery) to the Micro-A/B USB port.
Pay attention to the type of plug required for your
smartphone when purchasing the USB cable.
0 275 U08 3SG | (28.02.2022)

Operation

Status Indicators

The status LED (9) indicates the following statuses
with different colors and lighting patterns.
Status
Charging via USB
Inductive charging starts LED flashes yellow 3
Inductive Charging
Fully charged
Error message
The following alarm states are detected and will lead
to the inductive charging process being interrupted:
– Detection of foreign objects, e.g. coins, keys and
other metallic objects
– Temperature alarm
If the SmartphoneGrip is outside of the operating
temperature range, the status LED (9) will light up
red and the charging process is interrupted. The
charging process will resume as soon as the Smart-
phoneGrip is back within the operating tempera-
ture range.
– Overvoltage alarm at voltages above 6 V
– Undervoltage alarm at voltages below 4.2 V
Behavior
LED lights up blue.
times.
LED lights up yellow.
LED lights up green.
LED flashes red.
Bosch eBike Systems

Publicité

Table des Matières
loading

Table des Matières