Table Des Matières; Safety Precautions - Kreg KMA4500 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Table of Contents
Safety Precautions . . . . . . . . . . 2
Pre-Assembly . . . . . . . . . . . . . 3
(Not Included) . . . . . . . . . . . . 3
Product Description . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . 5
Calibration . . . . . . . . . . . . . . . 8

Safety Precautions

WARNING
Before using a power tool with this product, read and follow the
tool manufacturer's instructions and safety precautions in addition to the safety
precautions below to reduce risk of serious injury from hazards such as fire, electric
shock, or moving the blades/bits.
■ Follow your power tool manufacturer's instructions and safety precautions.
■ Always wear personal protective equipment required by the power tool
manufacturer.
■ Do not allow familiarity gained from frequent use of your tools to replace safe
work practices. A moment of carelessness is sufficient to cause severe injury.
■ Avoid awkward hand positions where a sudden slip could cause contact with the
blade or cutting tool.
WARNING
Do not operate this tool or any machinery while under the influence of
drugs, alcohol, or medications.
WARNING
This product can expose you to chemicals including Carbon 1333-86-4
and other chemicals, which are known to the State of California to cause cancer and
reproductive harm. For more information go to www.P65Warnings.ca.gov.
The labels on the guide rail may include these symbols:
Be cautious of
potential pinch point.
2
Wear proper eye,
ear, and respiratory
protection.
Operation . . . . . . . . . . . . . . 11
Trim Router Calibration . . . . . . . 14
Trim Router Operation . . . . . . . 14
Care and Maintenance . . . . . . . 14
Troubleshooting . . . . . . . . . . . 15
Assembly . . . . . . . . . . . . . 15
Set Up and Operation . . . . . . . 15
Keep hands and body away
from and to the side of the
blade. Contact with blade will
result in serious injury.
Read the
instructions.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kma4600Kma4700Kma4500-eKma4600-eKma4700-e

Table des Matières