Uniden UM-525 Mode D'emploi page 35

Rotate PUSH/SELECT to select FIPS, then press PUSH/SELECT to select it. FIPS CODES
and a list of the current FIPS codes appears.
To enter a new FIPS code, see "Entering a New FIPS Code". To edit a FIPS code, see
"Editing a FIPS Code". To delete a FIPS code, see "Deleting a FIPS Code".
Entering a New FIPS Code
1. Rotate PUSH/SELECT to select NEW, then press PUSH/SELECT to select it. The cursor
moves to the first character of the FIPS code.
2. Rotate PUSH/SELECT clockwise to move forward through the displayed numbers or
counterclockwise to move backward. When the number you want appears, press PUSH/
SELECT to select it. The cursor moves to the next number.
3. Repeat Step 2 for each of the FIPS code's characters. When you have entered all of the
FIPS code's numbers, hold down PUSH/SELECT. A confirmation screen appears.
4. If the FIPS code you set appears correctly, rotate PUSH/SELECT to select YES. The radio
saves the FIPS code you input. Otherwise, rotate PUSH/SELECT to select NO.
Editing a FIPS Code
1. Rotate PUSH/SELECT to select the FIPS code you want to edit, then press PUSH/SELECT
to select it. A screen appears where you can select what action you want to take.
2. Rotate PUSH/SELECT to select EDIT, then press PUSH/SELECT to select it. The cursor
moves to the first character of the FIPS code.
3. Rotate PUSH/SELECT clockwise to move forward through the displayed numbers or
counterclockwise to move backward. When the number you want appears, press PUSH/
SELECT to select it. The cursor moves to the next number.
4. Repeat Step 3 for each of the FIPS code's numbers. When you have entered all of the
FIPS code's numbers, hold down PUSH/SELECT. A confirmation screen appears.
5. If the FIPS code you set appears correctly, rotate PUSH/SELECT to select YES. The radio
saves the FIPS code you input. Otherwise, rotate PUSH/SELECT to select NO.
Deleting a FIPS Code
1. Rotate PUSH/SELECT to select DELETE, then press PUSH/SELECT to select it.
A screen appears where you can delete the vessel's information.
2. If you want to delete the displayed FIPS code, rotate PUSH/SELECT to select YES, then
press PUSH/SELECT to confirm it. The FIPS code is deleted.
Otherwise, If the displayed FIPS code is not the one you want to delete, rotate PUSH/
SELECT to select NO, then press PUSH/SELECT to confirm it. The FIPS code is not
deleted.
Using the Radio's Menus
35