Uniden UM-525 Mode D'emploi page 38

Setting Up a Group MMSI
You can program a group MMSI. A group MMSI is 9 digits in length.
1. Rotate PUSH/SELECT to select GROUP MMSI, then press PUSH/SELECT to select it.
2. To enter the first digit of the group MMSI, rotate PUSH/SELECT until the digit appears, then
press PUSH/SELECT. The digit you entered appears and the flashing cursor moves to the
next position.
3. Repeat Step 2 for each of the group MMSI's digits. When you have entered each of the
group MMSI's digits, a confirmation screen appears.
4. If the displayed group MMSI is correct, rotate PUSH/SELECT to select YES, then press
PUSH/SELECT to confirm it.
Otherwise, If the displayed group MMSI is not correct, rotate PUSH/SELECT to select NO, then
press PUSH/SELECT to confirm it. Then repeat Steps 2 and 3 to enter the correct group MMSI.
Setting Up a User MMSI
When you first turn on the radio, you must program a user MMSI. A user MMSI is 9 digits in length.
Important: If you have already set the user MMSI, do not change it unless you have
received a new user MMSI. After you program a user MMSI for the first time, you can only
change it once more. If you try to change the user MMSI a third time, the radio will not accept
the change. To change the user MMSI again, you must return the radio to Uniden for reprogramming.
1. Press MENU. A screen appears containing options you can select to work with the radio's
features.
2. Rotate PUSH/SELECT to select SETUP, then press PUSH/SELECT to
select it.
3. Rotate PUSH/SELECT to select USER MMSI, then press PUSH/
SELECT to select it.
If a user MMSI has already been programmed, a screen similar to the
following appears. Stop here.
If a user MMSI has already been programmed twice, a screen similar to
the following appears. Stop here.
Otherwise, if a user MMSI has not been programmed, you see the
following screen.
4. To enter the first digit of the user MMSI, rotate PUSH/SELECT until the digit appears, then
press PUSH/SELECT. The digit you entered appears on the display and the flashing cursor
moves to the next position.
38
WHAM PAGE
SETUP
SYSTEM
[EXIT]
SCRAMBLE
GROUP MMSI
USER MMSI
[EXIT]
USER MMSI
685749638
USER MMSI
685749638
CAN'T CHANGE
OVER 2 TIMES
USER MMSI
--------
0
Using the Radio's Menus
16
16
16
16
16