Anglecare AC417 Manuel Du Propriétaire page 9

Exit or go back
into Main Menu
General Settings
Camera Settings
Movement Sensor Pad Settings
Temperature Settings
Pairing units
IMPORTANT
When in menu or sub-menu modes, sound transmission between the Parent Unit and the Camera will be
temporarily deactivated. ONLY movement-detection alarm will remain active (if function is activated).
5.1 - SENSOR PAD
TO ACTIVATE/DEACTIVATE THE SENSOR PAD:
2
TO TEST THE SENSOR PAD:
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
MOVEMENT ALARM
• If NO movement is detected after 15 seconds you will
hear a single 'TIC' pre-alarm sound from the Camera.
• If after a further 5 seconds there is still NO movement
detected both the Parent Unit and Camera speakers will
emit loud continous beeps - this is the movement alarm.
• Movement Alarm icon will show on the
LCD screen.
68°F 18°C
3
1) After activating the Sensor Pad, the alarm will sound after
20 seconds.
2) Rub you hand over the mattress and confirm the alarm
stops.
02:04 68°F
1) Tap the Settings icon
2) Tap the Sensor Pad icon
3) Tap the Sensor Pad toggle button to activate/
deactivate the Sensor Pad (when activated the toggle
will turn blue). Then tap the Save button to confirm your
settings.
IF THE ALARM DOES NOT SOUND
• Avoid contact with the crib while
Sensor Pad is in operation.
• Place the crib near a supporting wall to
reduce vibrations.
• Adjust the Sensor Pad sensitivity level.
Turn OFF crib mobile, fans, loud music or
•
anything else that may cause vibration.
Save
customized
settings
in the video display view.
.
E
N
9