Anglecare AC417 Manuel Du Propriétaire page 10

PAUSING AND RESTARTING THE SENSOR PAD:
Allows you to pause the Sensor Pad if you remove baby from the crib, e.g. for feeding or comforting.
IMPORTANT
• If you do not pause the Sensor Pad, the alarm will sound if there is no movement after 20 seconds.
• Ensure to unpause the Sensor Pad before putting baby in the crib.
TO ACTIVATE/DEACTIVATE TIC FUNCTION:
2
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
To ensure adequate monitoring of your child's movements, you can adjust the sensitivity of the Sensor Pad in the main
settings menu. Set a high sensitivity for a newborn and a lower sensitivity as the child grows and gains weight. A thicker
mattress will also need a higher sensitivity.
2
5.2 - SOUND
TO ADJUST/MUTE SOUND:
Press the Volume up /
Volume down button to
adjust the sound level.
IMPORTANT
To avoid feedback (whistling), keep both units at
least 10 feet (3 meters) apart or reduce Parent
Unit volume.
10
PAUSE/UNPAUSE
Sensor Pad Buttons
68°F 18°C
3
68°F 18°C
3
68°F
1) Tap the Settings icon
view.
2) Tap the Sensor Pad icon
3) Tap the Tic
toggle button to activate the
function (the toggle button will turn blue). Then
tap the Save button to confirm your settings.
1) Tap the Settings icon
view.
2) Tap the Sensor Pad icon
3) Tap to adjust the Sensor Pad
or
Sensitivity level. Then tap the Save button to
confirm your settings.
To mute the sound level
68°F
press the Volume down
button until the mute
symbol is displayed.
IF YOU HEAR NO SOUND:
• Check that both units are powered ON.
• Check that Parent Unit is not on MUTE.
• Bring the Parent Unit closer to the Camera.
in the video display
.
in the video display
.