Introduction; Intended Use; Depicted Components; Package Contents - Parkside PLPD 60 A1 Traduction Du Mode D'emploi Original

Soldering gun with solder feed
PLPD 60 A1

Introduction

Congratulations on the purchase
of your new appliance. You have
selected a high quality product. The
operating instructions are part of this
product. They contain important information
on safety, usage and disposal. Before using
the product, familiarise yourself with all
handling and safety guidelines. Use the
product only as described and for the range
of applications specified. Please also pass
these operating instructions on to any future
owner.

Intended use

This appliance is intended for electronic
soldering for leisure and DIY purposes. It is
designed for applications such as soldering,
welding of plastics and the application of
ornamentation. Use this product only as
described and for the areas of applications
specified. The appliance is not meant for
commercial use. Any other usage of or
modification to the appliance is deemed to
be improper and carries a significant risk
of accidents. The manufacturer accepts no
responsibility for damage(s) attributable to
misuse.

Depicted components

Soldering tip
Soldering tip fixing screw(not visible)
Heating element tube
Solder wire guide tube
4
Wire feeding Trigger
Main body
LED indicator
Solder wire
Roller shaft
9
Solder wire roller
10
Shaft fixing screw
11
12 Roller frame
13 Solder wire guide cone
14 Temperature adjustment knob

Package contents

1pc soldering iron
1pc solder wire roller assembly with 20g
Ø1.2mm solder wire
1pc operation manual

Technical data

Rated voltage: 230 V~, 50 Hz
Nominal power: 60 W
Temperature: 0 ~ 330 °C , 4 stages,
0 °C / 150 °C ~ 170 °C
/ 220 °C ~ 250 °C /
300 °C ~ 330 °C
Auto shut down: 20 minutes
Solder wire: Ø1.0-1.2 mm
Power cord: 2 m
LED indicator: RED – heating,
GREEN – Ready
GB
IE
NI
71