Cleaning The Appliance; Disassembly And Cleaning - Boneco H300 Mode D'emploi

22

CLEANING THE APPLIANCE

en

DISASSEMBLY AND CLEANING

1. Take off the upper part of the BONECO appliance.
2. Remove the drum with the AW200 evaporator
mat.
3. Twist both drum discs to release them. When do-
ing so, note the markings on the outer side of the
disc.
4. Remove the AW200 evaporator mat from the
drum.
5. Clean the water base and the drum either by
hand or in the dish washer at a max. temperature
of 122 °F (50 °C).
122 °F
6. Put the appliance back together by following the
steps in reverse order.