Console Operations - BH LK500WS Guide D'utilisation

CONSOLE OPERATIONS

USB charging port
Treadmill
Indicator light
Safety Key
Register your product warranty online at: www.BHFitnessUSA.com
22
Questions regarding warranty and parts call: 636.634.2217
Desktop action
indicator light
Desktop control buttons
LED Window
Mode button
DualKit Port
Treadmill control buttons
CONSOLE OPERATIONS
BUTTON DESCRIPTIONS
1. START: Starts the treadmill, press Start again to pause the treadmill
2. STOP: Stops the treadmill.
3. SPEED+: While setting a program, this button will increase a setting value and when the
treadmill is running, it is used to increase the treadmill speed.
4. SPEED -: While setting a program, this button will decrease a setting value and when the
treadmill is running, it is used to decrease the treadmill speed.
5. MODE: Toggles between programs
6. Incline▲: Increases the desktop height
7. Incline▼: Decreases the desktop height
8. 1 / 2: Desktop height memory buttons – to set press one of the memory buttons for 3
seconds until the light fl ashes. The custom setting will be saved. Press the memory button to
return to the custom setting.
9. Safety Key – The safety key is magnetic and will rapidly stop the treadmill when it is pulled
off. When the safety key is off the display will say E07. The treadmill will not run with the
safety key off.
* Note: when moving the desktop up and down, make sure the desktop is free of unstable
items they can roll off the desktop.
DISPLAY RANGES
Set the initial
Initial
value
Time (Minute: Second) 0:00 N/A
Speed(km/h) (MPH) 0.0 N/A
Distance 0.0 N/A
Calories 0 N/A
PACE FUNCTION CALCULATION
When user is walking on the treadmill, the pace of user will be recorded automatically by the console.
Attention: the following factors will impact the accuracy of the pace calculation: speed, weight of user
and use characteristics. For example: It's diffi cult to record the pace of lighter user. (User weights
below 110lbs or 50kgs. Or the speed below 1MPH or 1.6KPH)
* NOTE – the maximum display range will fl ip to 0 after it gets to 9999.
AUTOMATIC STOP FUNCTION:
If the treadmill is not used for 30 seconds, the treadmill will stop automatically.
When the treadmill is in standby mode, press both "MODE" and "SPEED" button at the same time for
3 seconds to turn the Automatic stop function on or off. When the screen shows "on", this function is
ready, when the screen show "off", this function will not work.
Register your product warranty online at: www.BHFitnessUSA.com
Questions regarding warranty and parts call: 636.634.2217
Set range Display range
5:00-99:00 0:00-99:59
0.5-6.5kph
N/A
0.3-4.0mph
1.0-99.0 0.0-99.9
10-9990 0-9999
23