BH LK500WS Guide D'utilisation page 13

CONSOLE OPERATIONS
DESKTOP INCLINE AND DECLINE TEST
When the treadmill is in standby mode, press "▲"and "1" buttons at the same time for 3
seconds. The desktop will automatically rise up to the top position, then decline to lowest
position. (Remark: this function will help you to fi nd the top and lowest position of table)
BH DUALKIT INSTALLATION
1. To Access iConcept compatible apps, an optional (purchased separately) BH DualKit
Module is required.
INSTALLATION:
1.) There should be a blue square on the front of the console that says "DualKit". This is
where the DualKit Module plugs in.
2.) Make sure the USB part is extended from the module.
- Push up on the sides of the DualKit Module (Fig. 1)
- The USB should extend out of the bottom of the module (Fig. 2)
3.) Push the module in the USB slot on the front of the console (Fig. 3)
Fig. 3
Fig. 1 Fig. 2
Register your product warranty online at: www.BHFitnessUSA.com
24
Questions regarding warranty and parts call: 636.634.2217
USB CHARGING PORTS
The machine is equipped with 2 USB charging ports on the back of the console.
Note: Do not try to insert a Bluetooth module into the USB charging ports it could cause
damage.
CHANGING SPEED FROM MILES PER HOUR TO KILOMETERS PER HOUR
Pull out the safety key, press the "SPEED+" and "SPEED-" keys at the same time for 5
seconds. If the max speed is 4mph then the speed is in MPH. If the max speed is 6.5 the
speed is in KPH.
TREADMILL ERP SLEEP FUNCTION
When the treadmill is in standby mode and is not used for 4 minutes and 30 seconds, the
computer will automatically turn off. Press any key to restart the console, your data will be
retained. Press both "MODE" button for 3 seconds to turn this function on/off. When you
hear a long beep and the screen shows "2222", this function is on, when you hear a short
beep and the screen shows "1111", this function is off.
MANUAL MODE:
1. How to access manual mode:
2. There are three settings in manual mode: time setting, distance setting and calorie
setting. You can choose one function to countdown. The last function you have set will
countdown, the other fuctions will operate normally.
is fl ash, the default time is 30:00 minutes. Press Speed + and Speed – to adujust the
time. The time range is 5:00-99:00 minutes.
countdown
– to adjust the calories. The calorie set range is 10-9990.
countdown function. The default distance is 1.0km or 1 mile, you can press the Speed +
Insert Here
and Speed – to adjust the distance. The distance set range is 1.0-99.0.
3. MANUAL PROGRAM OPERATION INSTRUCTION:
CONSOLE OPERATIONS
A.Turn on the switch, access the manual mode directly.
B.When the treadmill is in standby, press the "M" button to choose manual mode.
A. When you access the manual mode, the screen show time: 0:00
B. When you press the "M" button, choose the countdown function, the time window
C. In the time countdown function, press the "M" button to access the calorie
function. The default calorie is 50 kilocalories, you can press the Speed + and Speed
D. In the calorie countdown function, press the "M" button to access the distance
A. Press sta rt button, the treadmill starts and the time counts down, the initial speed
is .3mph or .5kph.
B. Press the Speed + and Speed – to adjust the speed.
C. When treadm ill is working, press the Stop button, the treadmill will stop.
D. Pull off the safe ty key, the treadmill will stop and the console will display E07.
E. When the time countdown reaches 0, the speed reduces slowly until stopped.
F. When the dista nce countdown reaches 0, the speed reduces slowly until stopped.
G. When the calori e countdown reaches 0 the speed reduces slowly until stopped.
Register your product warranty online at: www.BHFitnessUSA.com
Questions regarding warranty and parts call: 636.634.2217
25