Lift Picker; User Interface; Lcd; Push Buttons - GBC Magnapunch 2.0 Manuel D'installation Et D'utilisation

l p
ift iCkeR
Raise the lid of the Lift Picker to stack media that has
been punched or that is to be punched.
Figure 6. Magnapunch 2.0 with Media in Lift Picker.
U i
seR nteRfaCe
The User Interface (UI) consists of an LCD and four
buttons below the LCD. The LCD displays system
messages and provides access to operational
functions. The push buttons below the LCD are used
to navigate through the menus, select items, and
commit commands.
Figure 7. Start Up Screen.

lCd

The LCD provides continuous status of the
Magnapunch 2.0 and includes step by step
instructions on how to use your Magnapunch 2.0.
Page 5-2
Magnapunch 2.0 – Installation and Operating Instructions
p B
Ush Uttons
The Push Buttons relate to the commands at the
bottom of the LCD. The action of the button may
change depending on the menu on the LCD.
e G
dGe Uide and
t
RiGGeR

Edge Guide

adjustment handle
Figure 8.
e G
dGe Uide
The Edge Guide sets the position for a variety of
punching patterns and paper sizes.
Turn the Edge Guide handle 1/4 turn
counter-clockwise to unlock. Move the Edge Guide
to line up with the desired setting on the Die Set and
then turn the handle clockwise 1/4 turn to lock the
Edge Guide in place.
Figure 9.
t
aBletop
Tabletop Trigger

Edge Guide and Tabletop Trigger.

Edge Guide Unlocked.