switel BDT 800 Mode D'emploi page 89

D Trigger alarm (also refer to R)
q
Press to dial the phone number of the special services ex-
change. The special services exchange notifies listed persons or
sends one of the services to provide help, as necessary.
Settings
The alarm unit can assign different ringing melodies to the various phone numbers (contact person, service exchange, self-test and low battery
warning). This means you know who is calling simply from the ringing melody.
E Adjusting the ringing melody and volume
q
Press and hold until the red LED lights up.
q
Press again.
The current melody is played.
no
Press to select one of the five melodies.
q
Press to change the volume setting.
no
Press to set the volume.
p
Press and hold to save the setting.
F Setting the melody for the contact person
q
Press and hold until the red LED lights up.
q
Press again 3 times.
no
Press to select one of the five melodies.
p
Press and hold to save the setting.
G Setting the melody for the services exchange
q
Press and hold until the red LED lights up.
q
Press again 4 times.
no
Press to select one of the five melodies.
p
Press and hold to save the setting.
H Setting the self-test melody
q
Press and hold until the red LED lights up.
q
Press again 5 times.
no
Press to select one of the five melodies.
p
Press and hold to save the setting.
Alarm Unit
Result:
This melody rings when a call is received from any number.
An acoustic acknowledgement signal is issued.
Result:
This melody rings when the contact person calls.
Result:
This melody rings when the exchange calls.
An acoustic acknowledgement signal is issued.
Result:
This melody rings when the self-test number is called.
*1)
An acoustic acknowledgement signal is issued.
89