4 Operating the Telephone
Illustration and description of operations
ë
2 sec
Press and hold
Release
{í}
{ì}
è
é
EXAMPLE or
Icons in the display
Icon
Description
On: A call is currently being made.
a
On: Handsfree mode has been switched on.
b
On: An external call is currently being made.
e
Flashing: An external call has been received.
On: An internal call is currently being made.
i
Flashing: An internal call has been received.
On: You have opened the caller list (CLIP).
c
Flashing: New calls have been stored in the calls list (CLIP).
On: This phone number in the calls list has not been called back.
f
On: This phone number in the calls list has already been called back.
g
Flashing: Please charge the handset.
On: Displays battery capacity.
d
Runs through the segments: The handset is being recharged.
On: Appears when using the phone book.
h
On: Appears immediately programming mode has been activated.
j
On: The key lock function is switched on.
k
On: The connection to the base station is good.
l
Flashing: The handset is out of range of the base station.
On: The phone number is in excess of 12 digits.
m
Navigation buttons
17
All descriptions in this operating manual assume that the handset is in Standby mode. Standby mode is activated by pressing the ¤
button.
80
Operating the Telephone
Enter digits or letters
Press the button depicted briefly
Press the button depicted for 2 seconds
Press and hold the button depicted
Release the button depicted
Handset rings
Base station rings
Remove the handset from the base station
Place the handset in the base station
Text or icons in the display