Sportplus SP-TM-1006 Mode D'emploi page 39

• If the surface feels quite dry and/or if the product begins making unusual noises,
you should apply lubrication.
APPLYING LUBRICATION
• Lift one side of the treadmill belt.
• Apply the lubricant to the middle of the treadmill belt.
• Turn on the treadmill on the lowest speed level. Wait until the lubricant has been
distributed evenly beneath the belt.
RUNNING BELT
Do not apply too much lubricant. Thoroughly wipe away any excess lubricant from the
SP-TM-1006-IM-V02-INT.indb 39
RUNNING BOARD
Note:
sides of the belt. ATTENTION, SLIP HAZARD!
39
4/12/2021 4:31:42 PM