Sygonix 1593775 Notice D'emploi page 58

5. Use the
configure the hour settings. The setting
is retained until you change it with the
TEMP button.
6. Press the PROG button to exit the settings menu. You can then configure
the other days as described in steps 3 to 5.
If you wish to use the same settings on
two days, you can use the COPY but-
ton (25) to copy a program. Press the
COPY button at the beginning of the
settings process. "COPY" will appear
on the display. Press OK to confirm.
7. Repeat steps 1–6 to configure the
settings for the other days.
8. When you have finished configuring
the settings, press OK to confirm.
58
and buttons to