GYS PSW 601 W Mode D'emploi page 9

Translation of the original instructions
• Under no circumstances should solvents or other aggres-
sive cleaning agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Regulations:
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The
British Declaration of Conformity is available on our
website (see home page).
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on
our website (see cover page).
Disposal:
This product should be disposed of at an appropriate recy-
cling facility. Do not dispose of in domestic waste.
DESCRIPTION
The inverter converter PSW (Pure Sinus Wave) is a device that converts a DC voltage of 12 V or 24 V into an AC voltage
of 230 V. This product is widely used for various applications such as vehicles, structures and mobile devices for tele-
communications, public safety, emergency, etc.
This converter has the advantage of being small, lightweight, stable and highly efficient in conversion. It is equipped
with 5 protections: input under/overvoltage protection, overload protection, overtemperature protection, output short-
circuit protection.
STRUCTURE INTRODUCTION
1- AC Output Sockets
2- Power Indicator (Green)
3- Fault Indicator (Red)
4- ON/OFF Switch
5- USB Output
PSW 601 W / 1002 W / 1502 W - 12 V /
2002 W - 12 V / 2002 W - 24 V
PSW 601 W
1 2 3
5
4
7 8
6
6- Remote Port
7- DC Input «+» Terminal (Red)
8- DC Input «-» Terminal (Black)
9- FAN
10- Earth
EN
9
10
9 9