GYS PSW 601 W Mode D'emploi page 12

Translation of the original instructions
Connection
The monitoring remote control must be connected to the converter when it is not energised.
1. Connect the remote control to the converter (1).
The remote control can be fixed once the connection has been established.
On / Off button
The remote control allows the converter to be controlled remotely (max. 5 m).
The On/Off function of the remote control only works if the main switch of the converter is
set to Off.
1. Press the button (2) for a long time (> 3 s). The converter lights up, the Power LED turns green.
2. Repeat the same operation to switch off the inverter.
Digital display
(remote control PSW 1002W / 1502W / 2002W)
- The "INPUT DISPLAY" screen gives information about the battery voltage.
- The "OUTPUT DISPLAY" screen informs about the power consumption of the device connected to the converter.
A simple press of the button (2) switches between the two displays.
Indicators
The green indicator is the power indicator. The red indicator indicates a fault :
F01
Low volt
PROTECT FUNCTION AND RESTART WORK METHOD
Function
Input low
voltage alarm
Input low
voltage shut down
Input over
voltage protection
Over load
protection
Over temperature
shut down
Output short
circuit
12 12
PSW 601 W / 1002 W / 1502 W - 12 V /
2002 W - 12 V / 2002 W - 24 V
F02
Over volt
State description
LED light alarm
Green : on
Alarm
Red : off
Green : on
Alarm
Red : on
Green : on
Alarm
Red : on
Green : on
Alarm
Red : on
Green : on
Alarm
Red : on
Green : on
Alarm
Red : on
F03
Over load
AC output
AC have output
No AC output
No AC output
No AC output
No AC output
No AC output
F04
Over temp Output short-circuit
Restart work method
When the voltage of the batter return to the
related voltage, alarm stop automatically.
When the voltage of the batter return to
the related voltage the inverter will restart
work, green light on, red light off.
When the voltage of the batter return to
the related voltage the inverter will restart
work, green light on, red light off.
Reduce the load to related rang the inverter
will restart work, green light on, red light off.
When the inside temperature return to rela-
ted rang, inverter will restart work, green
light on ,red light off.
When short circuit stopped, inverter restart
to work automatically.
EN
F05