V-ZUG COOLTRONIC 51029 Mode D'emploi page 36

Approx. 5 seconds after releasing the
button, the display stops flashing and
the current average temperature is dis-
played again.
Decrease refrigerator temperature
4
(down to min. 3 °C):
After 3 seconds the temperature display
starts to flash and shows the selected
temperature value. Each time you now
press the button, the temperature value
is decreased by 1 °C. If you hold down
the button, the value decreases auto-
matically until you release the button or
the minimum value is reached. Approx.
5 seconds after releasing the button, the
display stops flashing and the current
average temperature is displayed again.
Refrigerator temperature display:
5
A temperature value averaged over
2 hours is displayed, which may be dif-
ferent from the set value. This can be the
case particularly after defrosting or if the
door has been open for a while. If the
temperature is lower than -5 °C, «LO» is
displayed; if it is higher than 20 °C, «HI»
is displayed.
Freezer temperature display
6
An actual value averaged over 2 hours
is displayed, which may be different
from the set value. This can be the case
particularly if the door has been open
for a while or if a large amount of warm
foodstuffs have just been stored. If the
temperature is lower than -30°C, «LO»
is displayed; if it is higher than -5 °C,
«HI» is displayed.
32
Increase freezer temperature
7
(up to max. -14°C):
After 3 seconds the temperature display
starts to flash and shows the selected
temperature value. Each time you now
press the button, the temperature value
is increased by 1°C. If you hold down
the button, the value increases auto-
matically until you release the button or
the maximum value is reached. Approx.
5 seconds after releasing the button, the
display stops flashing and the current
average temperature is displayed again.
Decrease freezer temperature
8
(down to min. -24 °C):
After 3 seconds the temperature display
starts to flash and shows the selected
temperature value. Each time you now
press the button, the temperature value
is decreased by 1 °C. If you hold down
the button, the value decreases auto-
matically until you release the button or
the minimum value is reached. Approx.
5 seconds after releasing the button, the
display stops flashing and the current
average temperature is displayed again.
Fast freeze button
9
This activates maximum chilling per-
formance for the freezer. A snowflake
appears on the display. After 24 hours
the system is reset to the original set-
ting and the snowflake disappears. The
fast freeze function can also be disabled
before this time by pressing the button
manually again.