Points To Check Before Calling The Technical Service - Silverline RS5336C01 Manuel D'utilisation

blocked by the foreign matters.
• Place the heater zone head "C" (see figure 6) correctly and make sure it is
fixed.
GB
• The correct placement of the pot supports is determined by the rounded
corners. These corners should face the outer edge of the hob.
• If the parts cannot be loosened or fitted easily, please do not force and contact
a technical service.
• Do not use steam cleaners to clean the device.
MAINTENANCE AND REPAIR
• The maintenance and repair of the device should only be carried out by the
authorized service personnel. Our company shall not be liable for the damages
to people, animals or things due to the repair and maintenance of the device
performed by the unqualified people.
• If the electric cable is damaged, the replacement of the cable should only be
carried out by a qualified electrician.
• We recommend that the hood be replaced every five years. IMPORTANT: In
you decide to re-use the device, unplug the hob. The unused devices have
safety hazard for children. So please keep your hob away from the reach of
children.

POINTS TO CHECK BEFORE CALLING THE TECHNICAL SERVICE

• If the lighter does not work when the control buttons are pressed, Are the
electrical connections of the hob proper? The fuse may be tripped. Is the lighter
clean? Are the heaters (cover, head, etc.) placed properly? If the hob is fixed to
the kitchen counter, the fixing legs may be damaged.
• If only one control button is pressed but all the lighters work, this is normal. The
lighter system is central and all the lighters work simultaneously.
• If the lighters work but the hob zones are not heated, The gas hose may be
squashed, the main gas cock should be open. The gas type or tank you use may
be hollow, If you newly installed the hob or changed the tube, hold the control
42
Figure 6