SOLIS BarVista Mode D'emploi page 42

Cleaning the filters, filter holder and brewing head
• The stainless steel Filters and Filter Holder should be
rinsed under water directly after use to remove all
coffee particles. Should the fine holes in the filters
become blocked, the fine pin on the Cleaning Tool can
be used to clear the holes.
• The Brew Head interior should be wiped with a damp
cloth to remove any ground coffee particles.
• Periodically run water through the machine with the
Filter Holder in place, but without any ground coffee, to
rinse out any residual coffee particles.
Cleaning the outer housing/cup warming plate
• The outer housing and cup warming plate can be
cleaned with a soft, damp cloth (do not use abrasive
cleansers, pads or cloths which can scratch the
surface).
Cleaning the drip tray
• The Drip Tray should be removed, emptied and cleaned
at regular intervals, particularly when the Drip Tray Full
Indicator is showing full.
• Remove the Drip Tray Full Indicator and Grid from the
Drip Tray, wash with warm soapy water, using a non-
abrasive washing liquid, rinse and dry thoroughly.
• If further cleaning is required the full indicator can be
removed from the drip tray by releasing the side
snaps.
NOTE: Do not clean any of the parts or
accessories in the dishwasher.
41