Directions For Use - Cooper Surgical Advincula Arch 53469 Mode D'emploi

DIRECTIONS fOR uSE

front View
Mating Pin
Latch
before Attaching the Adapter
The following steps must be completed prior to attaching the
Adapter to the UPS
1. Patient is positioned, prepped and the Manipulator Handle
is inserted.
2. UPS arm and patient are properly draped.
Attaching the Adapter to the uPS Arm
1. Align the reinforced punch-out hole in the UPS Sterile Drape with
the Mating Hole in the UPS arm.
2. Insert the Adapter's Engagement Pin (see Figure 1) into the UPS
arm's Mating Hole until secure. Use the Alignment Pin for proper
orientation of the Adapter.
3. Ensure that the Adapter is securely in place on the arm.
before Attaching the manipulator Handle
The following steps must be completed prior to attaching the
Manipulator Handle to the Adapter:
1. Patient is positioned for surgery.
2. Draped UPS arm and Adapter are placed in approximate position
for attachment near the proximal end of the Manipulator Handle.
Attaching the manipulator Handle
CAuTION: DO NOT attach the Manipulator Handle to the UPS arm
until after the patient is in final position and sedated.
1. Open the Latch on the Adapter (see Figure 2).
CAuTION: Securely hold the uPS handle before the foot
pedal is depressed to avoid inadvertent movement of the
manipulator Handle.
Note: For optimal motion, grasp only the handle of the UPS to move
the device.
2. Grasp the handle of the UPS, press the foot pedal, and move the
arm to align the Adapter with the Manipulator Handle. Take care
to minimize movement of the Manipulator Handle within the
patient.
3. Position the Mating Pin on the Adapter into the Mating Hole of the
Manipulator Handle.
Latch
Mating Pin
figure 2. Attaching the Advincula Arch Handle
figure 1. Advincula Arch™ Adapter
arm:
™
Advincula Arch Handle
back View
Alignment Pin
Engagement Pin
Advincula
Arch Adapter