Preface; Warning Signs And Symbols; Machine Description; Intended Use-Description - GÖLZ FS125 Mode D'emploi Et Liste Des Pièces De Rechange

FS125

Preface

Thanks for choosing
operating instruction is designed to familiarize the user
with the machine and its designated use.
The operating instruction
information on how to operate the machine safely,
properly and most
instructions helps to avoid danger, to reduce repair
costs and downtimes and to increase the reliability and
life of the machine. The operating instruction is to be
supplemented by the respective national rules and
regulations for accident prevention and environmental
protection. The operating instruction must always be
available wherever the machine is in use. This
operating instruction must be read and applied by any
person in charge of work with or on the machine, such
as:
 Operation including setting up, troubleshooting in
the course of work, evacuation care and disposal of
fuels and consumables.
 Maintenance (servicing, inspection, repair) and/or
 Transport
In addition to the operating instructions and to the
mandatory rules and
prevention and environment protection of the country
and place of use of the machine, the generally
recognized technical rules for safe and proper working
conditions and procedures must also be observed.
In this manual all the information required for the
intended use of the unit is included. If though you have
any specific questions,
representative, to one of our sales representatives or
directly to us:
GÖLZ
Dommersbach 51, D-53940 Hellenthal
Telefon: +49 (0) 2482 12 200 / Telefax: +49 (0) 2482 12 222
E-Mail: info@goelz.de / Internet: www.goelz.de

Warning signs and symbols

Wear safety Wear hard
glasses!
Wear protective Read owner's manual
gloves! before first initiation!
®
a GÖLZ -product.
contains important
efficiently. Observing
regulations for accident
please refer to
®
GmbH
Wear safety
hat! boots!
Wear safety
clothes!
This
Wear dust
protection!
these
Important
advice!
1.

Machine description

1.1

Intended use-description

The FS 125 is a floor saw with a cutting depth of up to
120 mm.
Its operating range includes the concrete and asphalt
road construction,
longitudinal and expansion joints.
Operate the machine only using tools in accordance
with the manufacturer's instruction. Using other tools is
considered contrary to its designated use. The
manufacturer cannot be held liable for any damage
resulting from such use. The risk of such misuse lies
entirely with the user. Der FS 125 is equipped with a
your
petrol engine Honda GX200 and should be operated
with the fuel specified by the manufacturer.
Information: Unconditional observe
the owner's manual of the engine
manufacturer, which is added!
1.2

Technical data

Max. cutting depth
Max. blade-Ø
Flange size
Blade shaft size
Engine
Max. cutting speed with
blade
Engine shaft speed
Blade shaft speed
- 22-
Wear ear muffs!
General danger!
It is not allowed to move the machine
with rotating blade outside of the area in
which cutting works
performed!
but mainly
120 mm - 4.7 in.
350 mm - 13.8 in.
Ø 90 mm - 3.54 in.
Ø 25,4 mm - 1 in.
Gasoline engine
HONDA GX200
4,1 kW (5,6 HP)
58,5 m/s - 192 ft./sec.
3600 rpm
2730 rpm
BA-DE-GB-FR-NL (001)
®
Never touch!
Danger exists
to cut oneself!
have to be
for transverse,
5009002-00