Operating Elements; Safety Devices; Basic Safety Instructions; Intended Use - GÖLZ FS125 Mode D'emploi Et Liste Des Pièces De Rechange

FS125
1.5

Operating elements

1
2
1. Hand wheel - raising and lowering
2. Depth control
1.6

Safety devices

Danger: During cutting or displacing
the machine, all safety devices shown
below must be mounted!
Blade guard
2.

Basic safety instructions

In this manual the following terms and symbols are
used for particular important information:
Poly-V belt guard
- 24-
Note / Important: Contains important
information which stands out from
the other text!
Attention:
which must be strictly observed to
prevent damage from the unit and the
operator!
Important text passages are highlighted in italics or
bold or can be found in a grey highlighted text field.
2.1

Intended use

The machine has been built in accordance with state-
of-the-art standards and the recognized safety rules.
Nevertheless, its use may constitute a risk to life and
limb of the user or of third parties, or cause damage to
the machine and to other material property.
The machine must only be used in technical perfect
condition in accordance with its designated use and
the instructions set out in the operating manual, and
only by safety-conscious persons who are fully aware
of the risks involved in operating the machine. Any
functional disorders, especially those affecting the
safety of the machine, should therefore be rectified
immediately!
The machine is designed exclusively for cutting in
concrete, reinforced concrete, natural stone, cast
stone and brickwork. Using the machine for purposes
other than mentioned above (such as cutting in wood
and so on) is considered contrary to its designated
®
use. The GÖLZ GmbH cannot be held liable for any
damage resulting from such use. The risk of such
misuse lies entirely with the user.
Only use gear drives and motors, which are provided
®
by GÖLZ GmbH. Also attend those operating
manuals.
Operating the machine within the limits of its
designated use also
instructions set out in the operating manual and
complying with the inspection and maintenance
directives.
Attention: Read and observe all the
operating instructions which belong
to this unit!
2.2

Operating range

Do not modify, add components to or retrofit the unit in
a way which could affect its safety and do not use non-
official accessories! This is not allowed without prior
®
approval of GÖLZ GmbH!
Contains instructions
involves observing
5009002-00
BA-DE-GB-FR-NL (001)
®
the