Bartscher AL 2 Mode D'emploi page 43

Rapid freezing with temperature regulation via probe for measuring
internal product temperature
1. Insert the probe into the food product.
CAUTION!
Insert the internal product temperature probe into the food product to a maximum
depth of 2 – 3 cm.
2. Press the button „freezing with temperature regulation via the probe for measuring
internal product temperature"
3. Activate the cycle by pressing the START button
4. The rapid freezing cycle is finished with the internal temperature of the food product
has reached -18° .
5. The conservation phase begins automatically. During the conservation phase, the
internal unit temperature will be displayed in red.
During the rapid freezing cycle it is possible to view the internal unit temperature by
pressing the button „freezing with temperature regulation via the probe for measuring
internal product temperature"
the display for 5 seconds.
It is also possible to display the elapsed freezing time by pressing the button „freezing
with time regulation"
If you wish to remove the food product from the refrigerator-flash freezer, press the
START button
To place the unit in STANDBY mode, press and hold for 3 seconds one of the following
buttons
.
. The internal unit temperature will appear in green on
. The elapsed time will be displayed for 5 seconds in green.
to suspend the rapid freezing cycle.
. The internal unit temperature will be displayed in green.
.
- 43 -