Bartscher AL 2 Mode D'emploi page 39

Confirm the value via the „cooling with temperature regulation via probe for
measuring internal product temperature" button
3. Activate the cycle by pressing the START button
4. The rapid cooling cycle is finished when the internal product temperature reaches +3° .
5. The conservation phase begins automatically. During the conservation phase, the
internal unit temperature will be displayed in red.
During the rapid cooling cycle it is possible to view the internal unit temperature by
pressing the button „cooling with temperature regulation via probe for measuring internal
product temperature"
display for 5 seconds.
It is also possible to display the elapsed cooling time by pressing the button „cooling with
time regulation"
If you wish to remove the food product from the refrigerator-flash freezer, press the
START button
To place the unit in STANDBY mode, press and hold for 3 seconds one of the following
buttons
The internal unit temperature will be displayed in green.
The refrigerator-flash freezer is prepared for a new rapid cooling cycle.
To begin the next cooling cycle, press and hold for 3 seconds one of the following
buttons
. The internal unit temperature will appear in green on the
. The elapsed time will be displayed for 5 seconds in green.
to suspend the rapid cooling cycle.
.
.
.
.
- 39 -