Technical Data; Installation And Operation; Safety Instructions - Bartscher AL 2 Mode D'emploi

4. Technical data

Name
Article no.:
Construction:
Coolant:
Rapid cooling cycle:
Flash freeze:
Usable volume:
Capacity:
Energy class:
Power:
Dimensions:
Weight:
We reserve the right to make technical changes!

5. Installation and operation

5.1 Safety instructions

WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•
See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not move or tilt the device when in operation.
Blast chiller/Shock freezer AL 2
CNS 18/10 in accordance with HACCP directive
+70° C to +3° C
+70° C to -18° C
Cooling: 8 kg; freezing: 3 kg
230 V
W 680 x D 540 x H 510 mm
700.602
R404a
3 x 2/3 GN
4 (ST)
~ 50 Hz 560 W
60.0 kg
- 33 -