LUBRICATION
Lubricating under the running belt will ensure superior performance and
extend its life expectancy. After the first 25 hours of use (or 2-3 months)
apply some lubricant, and repeat for every following 50 hours of use (or 5-8
months).
Lubricant application
Raise one side of the treadmill. Put some lubricant under the middle of the
treadmill on top of the running deck. Turn the treadmill on and let it run at low
speed for 3-5 minutes to distribute the lubricant evenly.
Note: Never apply too much lubricant. If excess lubricant runs out, wipe it
off immediately.
Checking the Treadmill for Correct Lubrication
Raise one side of the treadmill and touch the top of the running deck. If the
surface is smooth, no further lubrication is required. When the surface is dry,
apply some lubricant.
EN
51