CLEANING AND MAINTENANCE
Note: To prevent electrical shock, please turn off and unplug the treadmill
before cleaning or performing routine maintenance. Always check the wear
and tear components like spring knob and running belt to prevent injury.
Cleaning
•
After each exercise, ensure that the unit is wiped down and any sweat is
removed from the unit.
•
The treadmill can be cleaned with a soft cloth and mild detergent. Do not
use abrasives or solvents. Be careful not to get excessive moisture on the
display panel as this might damage the unit and create an electrical hazard.
•
Please keep the treadmill, especially the computer console, out of direct
sunlight to prevent damage to the screen.
Storage
•
Store the treadmill in a clean and dry indoor environment.
•
Never leave or use the unit outdoors.
•
Ensure the master power switch is off and the power cord is un-plugged
from wall outlet.
Lubrication
Lubricating under the running belt will ensure superior performance and
extend its life expectancy. After the first 25 hours of use (or 2-3 months) apply
some lubricant, and repeat for every following 50 hours of use (or 5-8 months).
How to check running belt for proper lubrication
Lift one side of the running belt and feel the top surface of the running deck. If
the surface is slick to the touch, then no further lubrication is required. If the
surface is dry to the touch, apply some lubricant.
EN
51