IKEA ADRATT 904.620.39 Mode D'emploi page 36

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARE AND CLEANING
Caring for Your Glide Racks
Handle oven racks only when they are cool. After
cooking or after the fresh-clean cycle, racks will be
very hot and can cause burns.
Important Notes:
Remove all oven racks, including ladder racks,
before starting a clean cycle.
Do not use cooking oil, cooking spray, or other
oil-based lubrication products on the glide rack
extension tracks. Use only the graphite lubrica-
tion in this area. To order graphite lubrication,
contact your installer, servicer or dealer.
It is important that the parts of the rack that
contact the oven sides always have a light coat-
ing of vegetable oil. Apply a thin layer of vegeta-
ble oil to the sides of the rack after every fresh-
clean cycle and when the rack becomes diffi cult
to reposition in the oven.
To lubricate the glide rack:
1. Remove the rack from the oven and place the
rack on a large fl at surface covered with news-
paper or scrap cloth. Fully extend the rack.
2. Wipe away debris and crumbs from the glide
track using a cloth or sponge.
3. Shake graphite lubrication very well before ap-
plying. Apply to loading guides, and rotation pin.
Repeat on both sides of the glide rack
36
4. Extend and return the glide rack several times
along the tracks to distribute the lubrication.
5. Turn the rack upside down and apply graphite
lubrication to the insides of the loading guides.
6. Extend and return the glide rack several times
along the tracks to distribute the lubrication.
7. Apply a thin layer of cooking oil to the bottom of
the "V" and the glide channels. Keeping the frame
sides lightly lubricated allows the entire rack to slide
easily when changing rack positions
8. Replace glide rack in oven.
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Adratt 104.620.38

Table des Matières