2. Installation and Operation
NOTE: Before installation, please inspect the unit. Make sure that nothing inside the package is damaged.
Please keep the original package in a safe place for future use.
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged during
transportation. Do not turn on the unit and notify the carrier and dealer immediately if there is any damage
or lacking of some parts. Please keep the original packages in a safe place for future use. It is recommended
to keep each equipment and battery set in their original packages because they have been designed to
assure the maximum protection during transportation and storage.
NOTE: There are different types of M5T UPS: standard and long-run models (WOB versions – without
internal betteries – and S) both in High Voltage and Low Voltage. Please refer to the following table.
Power
10 kVA
M5T 10k HV
15 kVA
M5T 15k HV
20 kVA
M5T 20k HV
30 kVA
M5T 30k HV
40 kVA
M5T 40k HV
-
10 kVA
15 kVA
20 kVA
High Voltage (HV) means rated voltage 380 / 400 / 415 VAC
Low Voltage (LV) means rated voltage 190 / 198 / 208 VAC
2-1. Unpacking and Inspection
Unpack the package and check the package contents. The shipping package contains:
•
One UPS
•
One user manual
•
One monitoring software CD
•
One RS-232 cable
•
One USB cable
•
One parallel cable (optional for models 10/15/20k VA HV and 10kVA LV)
•
One Share Current cable (optional for models 10/15/20k VA HV and 10kVA LV)
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 Sautron, France – www.infosec-ups.com
80
Hotline : +33 (0)2 40 76 15 82 – Fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 22 AA 59 203 08
Model
-
M5T 10k LV
M5T 15k LV
M5T 20k LV
Version
M5T 10k WOB / S HV
M5T 15k WOB / S HV
M5T 20k WOB / S HV
Standard
models
M5T 30k WOB / S HV
HV
M5T 40k WOB / S HV
M5T 60k S HV
M5T 10k WOB / S LV
Standard
M5T 15k WOB / S LV
models
LV
M5T 20k WOB / S LV
Model
Version
long-run
models
long-run
models
HV
LV