INFOSEC M5T Manuel Utilisateur page 107

➢
OUTPUT W (%): L1, L2 and L3 output power watt in percentage.
➢
OUTPUT VA (%): L1, L2 and L3 output power VA in percentage.
➢
Total watt and VA: Total output load in watt and VA.
➢
BATT Voltage/Bus Voltage/Charging Current/Discharging Current: The real time
value of DC related information.
➢
Temperature: Temperature of L1, L2 and L3 phases.
➢
INPUT W: L1, L2 and L3 input power in watt.
➢
INPUT VA: L1, L2 and L3 input power in VA.
➢
INPUT W (%): L1, L2 and L3 input power watt in percentage.
➢
INPUT VA (%): L1, L2 and L3 input power VA in percentage.
➢
Input current: The real-time value of input current in L1, L2 and L3 phases.
➢
Output current: The real-time value of output current in L1, L2 and L3 phases.
3-2-4. Setting screen
This sub-menu is used to set the parameters of UPS. Touch the icon
menu page. There are 2 options: Basic and Advanced. Touch the icon
screen. Touch the icon
NOTE: Not all settings are available in every operation mode. If the setting is not available in
present mode, the LCD will keep its original setting parameter showed instead of changing the
parameters.
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 Sautron, France – www.infosec-ups.com
106
Hotline : +33 (0)2 40 76 15 82 – Fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 22 AA 59 203 08
Measure screen page 3
to go back to previous menu.
to enter setting
to return to main