INFOSEC M5T Manuel Utilisateur page 116

after setting.) The setting range is 16 ~ 20. 16 is default setting.
➢
Float VOL: The setting point of battery float voltage. 13.6V is default setting.
➢
UPS Type: There are two options, HV and LV. This change is only allowed for qualified
technician.
NOTE: It's required to restart the UPS after setting.
➢ Power Setting: Set power factor in percentage.
➢ Output setting: Set UPS output setting. There are two selections, 3-1 and 3-3.
NOTE: It's required to restart the UPS after setting.
➢ Customer Code: Set customer code. It's a necessary setting when using dynamic
password function.
➢ DynamicPassword: Enable or disable dynamic password function.
INSTALL INFO
➢
SYS Install Date: Set the date of UPS installation.
➢
BAT Install Date: Set the date of Battery installation.
➢
Date/Time: Set the date and time. The format is YYYY-MM-DD HH:MM:SS. The
calendar day will be automatically changed when the year, month and date are set.
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 Sautron, France – www.infosec-ups.com
115
Hotline : +33 (0)2 40 76 15 82 – Fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 22 AA 59 203 08
SYS PARAMETER Page 2
INSTALL INFO Page