INFOSEC M5T Manuel Utilisateur page 98

manual provided with the SNMP card).
• An SNMP card for virtual network communication via IP address (follow communication instructions
on the manual provided with the SNMP card).
• An RS485 card for Modbus RTU communication
• An AS400 dry contact card for communication via GTC or alarm reporting.

Input signals port
This dry contact communication port allows UPS to receive up to 8 external signals.
Contact
1 remote on
2 remote off
3 SHUTDOWN
4 GENERATOR DETECTION
5 EXTERNAL OUTPUT SWITCH
6 BATCB
7 BYPCB
8 LINECB
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 Sautron, France – www.infosec-ups.com
97
Hotline : +33 (0)2 40 76 15 82 – Fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 22 AA 59 203 08
Message Description
on ups
off ups
shutdown and restore with one minute
generator input, give a sign to ups to
adapting
active the warning code (45),
disconnect the UPS from the parallel
system
when battery breaker or switch is
disconnected, show an alarm (46)
when bypass input breaker or switch is
disconnected, show an alarm (47)
when line input breaker or switch is
disconnected, show an alarm (48)