Operation; Power On/Off; Operation And Display Panel - INFOSEC G1 Manuel Utilisateur

OPERATION

Power ON/OFF

Once the unit has been properly installed and the batteries are connected well, simply press On/Off switch
to turn on the unit.

Operation and Display Panel

The operation and display panel, shown in below chart, is on the front panel of the inverter. It includes
three indicators, three function keys and a LCD display, indicating the operating status and input/output
power information.
LED Indicators
LED Indicator
Function Keys
Function Key
ESC
SELECT
ENTER
13
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 08 18 AA 59 203 14
Solid On
Green
Flashing
Solid On
Green
Flashing
Solid On
Red
Flashing
Description
To exit setting mode
To go to next page or next selection
To confirm the selection in setting mode or enter setting mode
Messages
Output is powered by utility in Line mode.
Output is powered by battery in battery mode.
Battery is fully charged.
Battery is charging.
Fault occurs in the inverter.
Warning condition occurs in the inverter.
LED indicators
Function keys
LCD display