Automatic Shutoff - Teuco BLOWER Manuel D'utilisation

SWITCHING ON FROM THE REMOTE CONTROL

AUTOMATIC SHUTOFF:

If no control panel or remote control button is pressed within 30 minutes following power-up or since the last function
was active (TIMER setting) the system shuts off and the display reverts to STAND-BY.
BLOWER
To switch on, press the "0/I" button;
the welcome message will appear in the control panel display
for a few seconds.
Thereafter,
the display switches to READY;
the system can now be used
(see BLOWER).
To switch off the panel, press "0/I" a second time:
GB
WELCOME TO
TEUCO
20 : 30
READY
Display indicating
READY status
20 : 30
Display in STAND-BY mode
9