Teuco BLOWER Manuel D'utilisation page 7

BLOWER
After switching on the system, pressing a single key on the control panel will start the Blower function.
When theTimer setting elapses, the system shuts off and the display reverts to STAND-BY.
To cut the function short press QUICK START a second time or use the remote control (see REMOTE
CONTROL:Preliminary operations); the system shuts off and the display reverts to STAND-BY.
ALARM
The ALARM can be activated directly from the control panel.
The alarm locks up the system, shutting off any functions currently selected, and can also activate a bell or other soun-
der, provided that this is already installed (see directions for installing the tub).
BLOWER
To start the functions, press the "QUICK START" button.
The functions start and the display shows:
The exact time.
The duration of the function (TIMER) in minutes.
Waterlight in progress.
To make adjustments, use the remote control
(see REMOTE CONTROL).
To activate the alarm, press the "ALARM" button.
To reset the system, press the QUICK START button or the
I/O button on the remote control;
the display reverts to STAND-BY mode and the system
shuts off.
15 20 : 30
BLOWER
Display indicating Blower in
progress
15 20 : 30
BLOWER
Display indicating Blower in
progress
20 : 30
Display in STAND-BY mode
A L A R M
Display indicating "ALARM"
status
20 : 30
Display in STAND-BY mode
7
GB