Performance Curves - Sera ABP - 030 Notice De Mise En Service

Air driven diaphragm pump
Pompe pneumatique à membrane
Operating instructions
Notice de mise en service
5.4

Performance curves

CAUTION !
In order to achieve an optimal service life, the operating
parameters of the pumps are to be approximately in the
middle of the performance diagram for normal operation.
= .......................... Air supply pressure
= ................... Air consumption Nl/min.
(Performance curves of single types see pages 9 – 12.)
CAUTION !
When the suction and pressure lines are separate, the
total capacity may be reduced by more than 50 %.
www.sera-web.com
12
Solids contents and viscous properties of the medium as well
as greater suction heights lead to a reduction of the capacity.
The performance curves represent average values and may
vary according to pump configuration. The measured values
were determined with submerged suction joints and water at
18 C.
Subject to technical modifications!
TA 312 Rev. 21 en 08/2018