4 Cleaning Metallic Parts; 4 Cleaning The Lower Spray Arm; 4 Cleaning The Upper Spray Arm - LG LDS6040ST Manuel Du Propriétaire

24
CARE & CLEANING
CLEANING METALLIC PARTS
Some exterior and interior parts can be cleaned with a damp cloth
or sponge. A cloudy film may form on the surface of the stainless
steel tub, especially with hard water.
CLEANING THE LOWER SPRAY ARM
y Make sure that the water jet holes are not blocked by food par-
ticles.
y When cleaning is necessary, remove the lower spray arm by
pulling up.
y After cleaning the lower spray arm, replace it by pushing down
until it clips into place. Be sure that the spray arm is able to turn
freely.
CLEANING THE UPPER SPRAY ARM
• Pull the upper rack forward. Make sure that the
water jet holes are not blocked by food particles.
• When cleaning is necessary, remove the upper
spray arm by turning the nut on the bottom of
the spray arm 1/8 turn counterclockwise and
pulling down.
• After cleaning the upper spray arm, press it
up into place. Turn the nut 1/8 turn clock-
wise to make sure that the nut locks back
into place.