Separator Cleaning And Replacement (If Equipped); Disposing Of The Vacuum Cleaner; Wiring Diagrams; Basic Model - Nilfisk T26 Manuel D'instructions

T26 / T48 / T63
Original instructions
Separator cleaning and replacement (if
equipped)
1. Separator
2. Band
3. Cover
4. Screws
If there is only a dust deposit on the separator (1) allow the
dust to drop through the central hole.
The separator (1) should first be disassembled in order to be
perfectly cleaned:
■ Use the band (2) to remove the cover (3) together with
the filter.
■ Unscrew the two screws (4) and remove it from the
container.
Replace the part if it is excessively worn. Assemble the
components in the reverse order of disassembly.

Disposing of the vacuum cleaner

Dispose of the vacuum cleaner in compliance with the laws in
force.
Proper disposal (electric and electronic waste).
■
(Applicable in the European Union and in countries
providing a separate collection system)
The above symbol (Fig. 19), which is present on the product
or in its documentation, indicates that the product cannot be
disposed of together with other domestic waste at the end of
its life cycle.
To prevent damage to the environment or health caused by
improper waste disposal, please separate this product from
other waste and recycle it responsibly in order to support the
sustainable reutilisation of material resources.
This product can not be disposed of together with other
commercial waste.
US
C356
Figure 17
[ NOTE ]
Figure 18

Wiring diagrams

Basic model

1. Plug
2. Vacuum cleaner
3. Circuit breaker
Part
Item
Circuit breaker
Q1
Box for Q1
Part
Item
Circuit breaker
Q1
Box for Q1
Part
Item
Circuit breaker
Q1
Box for Q1
10
Figure 19
Model
T26
N2 N3
8 39681 8 39681 8 39680
4083901448
Model
T48
N2 N3
8 39683 8 39683 8 39681
4083901448
Model
T63
N2 N3
8 39675 8 39675 8 39681
4083901448
02/2013
N4
N4
N4