Technical Support - Siemens SIPART PS2 Notice De Service

● Maximum output current
● Maximum output power
Maximum permissible external
capacitance
Maximum permissible external inductance -
Galvanic isolation
Test voltage
Non-contacting position sensor
Additional modules
Actuating range
● Linear actuator
● Part-turn actuator
Linearity (after corrections made by
positioner)
● Linear actuator
● Part-turn actuator
Hysteresis
Continuous operation temperature
Vibration resistance
● Harmonic oscillations
(sine) according to EN 60068-2-
6/05.96
Enclosure protection type
For connecting to circuits with the
following peak values
Maximum internal capacitance C
Maximum internal inductance L
Appendix
Certificate
The certificates can be found on the enclosed CD and on the Internet under:
Certificates (http://www.siemens.com/processinstrumentation/certificates)

Technical support

Technical Support
You can contact Technical Support for all IA and DT products:
● Via the Internet using the Support Request:
Support request (http://www.siemens.com/automation/support-request)
● E-mail (mailto:support.automation@siemens.com)
SIPART PS2 (6DR5...)
A5E03436620-01, 03/2011
Without explosion
protection
-
-
-
Without explosion
protection
3 ... 130 mm (0.12 ... 5.12"); up to 200 mm (7.87") on request
-40 °C to +85 °C (-40 °F to +185 °F); extended temperature range on request
7 mm (0.28"), 5 to 54 Hz; 500 m/s
-
-
i
-
i
With Ex protection Ex ia
I = 100 mA
o
P = 33 mW
o
C = 1 μF
o
L = 1 mH
o
Galvanically connected with the basic device
DC 840 V, 1 s
With Ex protection Ex i
30° ... 100°
± 1 %
± 1 %
± 0,2 %
2
IP68/NEMA 4X
Intrinsically safe
U = 5 VDC
i
10 nF
240 μH
With Ex protection
Ex "ic", "nL", "nA nL", "tD"
I = 75 mA
o
P = 120 mW
o
C = 1 μF
o
L = 1 mH
o
With Ex protection
Ex ic/Ex nL/Ex nA/Ex tD
(1640 ft/s ), 80 to 200 Hz
2
For "nL":
U = 5 VDC
i
10 nF (with "nL")
240 μH (with "nL")
49