Removal Of Parts; Technical Specifications; Structure; Dimensions - lopital Mylo Mode D'emploi

6. Removal of parts

All parts that are replaced or removed can be sent back to Lopital BV. You may also offer
the parts to the engineer for destruction. We will ensure that all parts are processed in
an environmentally-friendly manner.
7. Technical specifications
The Mylo is splash-proof. This is indicated by the IPX4 mark.

7.1. Structure

Frame:
Hinge points:
Wheels:
Body support:
Weight:
Maximum permitted load:

7.2. Dimensions

Surface area:
Seat height:
28 | Instructions for use | Mylo Shower-toilet chair
Stainless steel and steel tubes and plates that are
equipped with a 2-layer powder coating
Stainless steel, cover caps made of plastic V0
Plastic, Ø 12.5 cm / 4.9 inch, double blocking facility
PUR (polyurethane).
19 kg / 41.9 lbs
150 kg / 330 lbs
66 cm / 26 inch wide, 84 cm / 33.1 inch deep
55 cm / 21.7 inch