Ryobi RBC430SES Manuel D'utilisation page 27

EN
FR DE ES
Specific fuel consumption (in accordance with ISO8893) at
max. engine performance
Vibration level idling(Trimmer-reel easy string head) (m/s 2 )
- Front handle / Left handle
- Rear handle / Right handle
Vibration level racing(Trimmer-reel easy string head) (m/s 2 )
- Front handle / Left handle
- Rear handle / Right handle
Vibration level idling (Brush Cutter) (m/s 2 )
- Front handle / Left handle
- Rear handle / Right handle
Vibration level racing (Brush Cutter) (m/s 2 )
- Front handle / Left handle
- Rear handle / Right handle
Sound pressure level at operator's ear
(in accordance with EN ISO 22868) dB (A)
Sound power level (in accordance
with EN ISO 22868) dB (A)
KNOW YOUR BRUSHCUTTER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarise yourself with all
operating features and safety rules.
GRASS DEFLECTOR
The brushcutter includes a grass deflector that helps
protect you from flying debris.
SHOULDER STRAP
The brushcutter includes a shoulder strap that helps
support the product.
TOP-MOUNTED MOTOR
The top-mounted motor improves balance and is located
away from the dust and debris of the cutting area.
OPERATION
WARNING:
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses
IT PT NL SV DA NO FI HU CS RU
English
with side shields when operating power tools. Failure
to do so could result in objects being thrown into your
eyes resulting in possible serious injury.
WARNING :
Keep all bystanders, especially children and pet,
at least 15m away.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
WARNING:
Beware of the emission of exhaust gases.
FUELING AND REFUELING
Clean the surface around the fuel cap to prevent
Q
contamination.
Loosen the fuel cap slowly. Rest the cap on a clean
Q
surface.
Pour the fuel carefully into the tank. Avoid spillage.
Q
Clean and inspect the gasket prior to replacing the
Q
fuel cap.
Replace the fuel cap immediately and hand tighten it.
Q
Wipe up any fuel spillage.
NOTE: It is normal for the engine to emit smoke during
and after the first use.
24
RO PL SL HR ET
640 g/kW . h
8.3 ,K=1.5
3.2 ,K=1.5
24.3 ,K=1.5
10.3 ,K=1.5
7.7 ,K=1.5
2.6 ,K=1.5
23.5 ,K=1.5
9.3 ,K=1.5
103 ,K=3
110 ,K=3
LT LV SK BG
640 g/kW . h
7.9 ,K=1.5
3.0 ,K=1.5
24.3 ,K=1.5
10.2 ,K=1.5
7.6 ,K=1.5
2.6 ,K=1.5
23.6 ,K=1.5
9.5 ,K=1.5
103 ,K=3
110 ,K=3