Symbols on the device
Steam
ATTENTION - risk of scalding
Risk of burns from hot surfaces!
Overview of the device
Description of the device
Illustration A
Safety lock (steam boiler)
1
Control panel
2
Steam hose
3
Reset button - descaling
4
Steam switch
5
Accessory compartment
6
Device socket cover
7
Steam connector
8
Carrying handle
9
Cable hooks
10
Cover
11
Reservoir cap (fresh water tank)
12
Terry cloth cover
13
Filler funnel
14
Manual nozzle
15
Window nozzle (special accessory)
16
Mains cable
17
Type plate
18
Clip
19
Floor nozzle with bristles
20
Floor cleaning cloth (floor nozzle with bristles)
21
Round brush
22
Power nozzle (red)
23
Extension
24
Floor nozzle with slats
25
Spotlight nozzle (120 mm)
26
Spotlight nozzle (180 mm)
27
Floor cleaning cloth (floor nozzle with slats)
28
Locking button
29
Extension tube
30
Lock (child lock)
31
Steam gun
32
10
Illustration B
Switch - Fresh water tank pump
1
Indicator light - Heating (yellow)
2
Indicator light - Steam boiler water shortage (red)
3
Temperature indicator
4
Rotary knob for VAPOHYDRO regulation
5
Rotary knob for steam quantity regulation
6
Working temperature range
7
Indicator light - Descaling (white)
8
Indicator light - Fresh water tank water shortage
9
(red)
Switch - heating (on/off)
10
● Control elements for the cleaning process are yel-
low.
● Control elements for maintenance and servicing are
light grey.
Safety devices
Safety devices protect the user and may not be disabled
or functionally circumvented.
Pressure regulator
The pressure regulator keeps the boiler pressure as
constant as possible during operation. The heating is
switched off when the maximum operating pressure in
the boiler has been reached and switched on again
when the pressure in the boiler drops due to steam re-
moval.
Water shortage thermostat
The heating temperature rises when the water in the
boiler runs out. The water shortage thermostat switches
the heating off and the "Steam boiler water shortage" in-
dicator light lights up red. The heating cannot be
switched on again until the boiler has cooled down or is
refilled.
● If the water shortage thermostat fails and the device
overheats, the safety thermostat switches the de-
vice off.
● Before resetting of the safety thermostat, contact
the responsible KÄRCHER Customer Service.
● The safety lock seals the steam boiler against the
steam pressure present. If the pressure regulator is
defective and overpressure occurs in the steam boil-
er, an pressure relief valve opens in the safety lock
and steam escapes through the lock.
● Before re-commissioning the device, contact the re-
sponsible KÄRCHER Customer Service.
Cleaning methods
Freshening textiles
Always check the compatibility of the textiles at a con-
cealed point before using the device on textiles: First
steam the textile, allow it to dry and then check it for any
change in colour or shape.
English
Control panel
Colour coding
Safety thermostat
Safety lock