Device Description; Installation - Kärcher SC 4 EasyFix Iron Mode D'emploi

Risk of scalding from steam
Read operating instructions
Pressure controller
The pressure controller keeps the pressure in the steam
boiler as constant as possible during operation. The
heating is switched off when the maximum operating
pressure is reached in the steam boiler and is activated
if there is a pressure drop in the steam boiler as a result
of a steam removal.
Safety thermostat
The safety thermostat prevents the device from over-
heating. If the pressure regulator and the boiler thermo-
stat fail and the unit overheats, the safety thermostat
switches the unit off. Before resetting of the safety ther-
mostat, contact the responsible KÄRCHER Customer
Service.
Boiler thermostat
The boiler thermostat switches off the heating in the
event of a fault; for example, if there is no water in the
steam boiler and the temperature in the steam boiler ris-
es.
As soon as you refill the water, the device is ready for
use again.
Maintenance lock
The maintenance lock seals the steam boiler from the
steam pressure present. The maintenance cap is also a
pressure relief valve. If the pressure regulator is defec-
tive and the steam pressure in the steam boiler rises,
the pressure relief valve opens and steam is escapes
through the lock.
Prior to restarting the device, contact the responsible
KÄRCHER Customer Service.

Device description

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the figures, please refer to the graphics page
Illustration A
Unit plug with cover
1
Water reservoir
2
Filling hole, water reservoir
3
Switch - On
4
Switch - Off
5
Indicator light (green) - heating
6
Indicator light (red) - water shortage
7
Carrying handle
8
Holder for accessories
9
Holder for accessories
10
Maintenance lock
11
Storage for mains connection
12
Park bracket for floor nozzle
13
Mains connection cable with mains plug
14
12
Non-driven wheels (2 x)
15
Steering roller
16
Steam gun
17
Steam lever
18
Unlocking button
19
Selector switch for steam volume (with child lock)
20
Steam hose
21
Steam connector
22
Spotlight nozzle
23
Round brush (small)
24
**Power nozzle
25
**Round brush (large)
26
Manual nozzle
27
Manual nozzle microfibre cover
28
Extension tubes (2 x)
29
Unlocking button
30
Floor nozzle
31
Hook and loop fastener
32
Microfibre floor cloth (1 x)
33
**Microfibre floor cloth (2 x)
34
**Carpet glider
35
Descaler
36
Steam pressure iron
37
Indicator light (orange) - heating
38
"Steam" switch (top)
39
Lock for steam switch
40
"Steam" switch (bottom)
41
Temperature controller
42
Steam connector
43
** SC 4 EasyFix Premium Iron
Installing accessories
1. Insert and engage the steering roller and non-driven
wheels.
Illustration B
2. Open the cover on the device socket.
Illustration E
3. Connect the steam connector to the device socket
so that the steam connector audibly engages.
Illustration E
4. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration J
5. Push the open end of the accessory onto the spot-
light nozzle.
Illustration K
6. Connect the extension tubes with the steam gun.
English

Installation