6. Reactivating the airbag
SCHEME:
Cartridge
If you are unsure of the correct procedure to reset your airbag we recommend
you take it to an authorised dealer for resetting. The airbag can be reused if reset
according to the following procedure. Check the video on our website.
8
USER GUIDE
Piston
A . Position of the trigger after the activation: the
ball is out of its set, the piston has slid towards the
cartridge and the spring is visible.
B. Unscrew the CO2 cartridge and remove it. This
canister may not be reused and must be replaced
with a new one.
C. Unlock the cap with the 5mm allen wrench
supplied with the vest. You can use your fingers
at some point. Do not unscrew the bearing cap
completely. 12mm out of the cylinder is enough.
Key-Ball
Spring
Bearing Cap