Toto NEOREST SE Mode D'emploi page 44

Masquer les pouces Voir aussi pour NEOREST SE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Shower
The water won't turn off.

Are the hot and cold water knobs turned completely off?

Water dripping from the shower can be from residual water flowing inside the shower head. It is not
broken.
The hot/cold water doesn't work. There isn't enough flow.

Are the water main and shut off valves turned on far enough?

Are the knobs turned on far enough?

Has the water been shut off or could it be frozen?
The water's always cold.

Does the water heater produce enough hot water?
→ Please check the temperature and operating settings on the water heater.

Is the hot water knob turned on?
The water's always hot.

Is the cold water knob turned on?
Filling the bathtub
There isn't enough water flowing out.

Is there debris trapped in the filters in the hot or cold water connections in the function module?
→ Please clean them. ► See page 39.

Is there enough hot water from the water heater?
→ Please check the temperature and operating settings on the water heater.
→ Please set the hot water supply temperature to 140-158°F (60-70°C)

Are the water main and shut-off valves turned on?

Is there water pressure? ► See page 13.
The water is lukewarm.

Is the temperature setting on the controller low? → Please increase the setting. ► See page 17.

Is it adding cold water?

Is there enough hot water coming from the water heater?
→ Please check the temperature and operating settings on the water heater.
→ Please set the hot water supply temperature to 140-158°F (60-70°C)

Is there debris trapped in the filters in the hot water connections in the function module?
→ Please clean them. ► See page 39.

Is there water pressure? ► See page 13.
The water is too hot.

Is the Fill-Tub temperature setting too high? → Please lower the setting. ► See page 17.

Is it adding hot water? → Hot water is added at 118°F (48°C)

Is there debris trapped in the filters in the cold water connections in the function module?
→ Please clean them. ► See page 39.

Is there water pressure? ► See page 13.
44

Publicité

Table des Matières
loading

Table des Matières