Function Module - Toto NEOREST SE Mode D'emploi

Outside enclosure
Please wipe dirt off the function module enclosure with a damp cloth and then buff dry. When badly
soiled, please use a natural detergent.
Supplementary Protector
Please check the function of the Supplementary Protector two to three times a year. You risk electric
shock if you use the function module while the Supplementary Protector is broken.
Check to see that power is being supplied.
●Power is being supplied if you can operate the controller.
Remove the Supplementary Protector cover.
Push the test button on the Supplementary Protector.
●It is functioning normally if the power lever goes from on to off.
Supplementary
Protector cover
After the inspection, turn the power lever back on.
Reattach the Supplementary Protector cover as it was.
38

Function module

Power lever
Test button